Mandatory Disclosures
Mandatory Disclosures as per Annexure 10 of APH-2020-21 by AICTE
GOVERNMENT INSTITUTE OF TEXTILE TECHNOLOGY, NALLAPDU, GUNTUR â 522005, Ph.No: +91-9912342063
E-mail:
gitt063@gmail.com, Website:
https://www.gittguntur.ac.in/
- Name and address of the Trust/ Society/ Company and the Trustees
Department of Technical Education, Govt. Of Andhra Pradesh,
- Name and Address of the Vice-Chancellor/ Principal/Director
K V R Babu, Principal
Govt. Institute of Textile Technology, Nallapdu, Guntur District, Andhra Pradesh, 522005,
Ph.No- 9912342063, E-mail:kvr.babu@gmail.com
- Name of the affiliating University
State Board of Technical Education and Training, Andhra Pradesh
- Governance
The Institution is run by the Principal at the helm of affairs and as per the rules framed by the Government of Andhra Pradesh and also the instructions from the Commissioner of Technical Education, A.P., and the curriculum and examinations are governed by the State Board of Technical Education (MPECS) & Training, A.P.,
- Grievance Redressal Committee
S.NO. |
NAME |
DESIGNATION |
|
1 |
K VENKATA RAMANA BABU |
PRINCIPAL |
CHAIRMAN |
2 |
K MOHAMMED |
HTT |
MEMBER |
3 |
M SAILAJA |
AO |
MEMBER |
4 |
K VENKATESWARLU |
L/TT |
MEMBER |
5 |
T SRINIVASULU |
SL/MATHS |
MEMBER |
- Anti Ragging/ Discipline Committee
- Anti-Ragging/Discipline Committee is constituted with the following Head of Section and staff members under the chairmanship of the Principal
- Student members of the Anti-ragging committee
S.NO. |
NAME |
DESIGNATION |
|
1 |
K MOHAMMED |
HTT |
MEMBER |
2 |
M SAILAJA |
AO |
MEMBER |
3 |
K VENKATESWARLU |
L/TT |
MEMBER |
4 |
T SRINIVASULU |
SL/MATHS |
MEMBER |
5 |
G LAKSHMI JYOTHI |
L/TT |
MEMBER |
6 |
T SOMAIAH |
LIBRARIAN |
MEMBER |
7 |
CH ASWIN KUMAR |
JR ASSISTANT |
MEMBER |
- Online Grievance Redressal Mechanism
The web address of online
Grievance Redressal Mechanism https://grievance.gittguntur.ac.in/
- Internal Complaint Committee (ICC)
- Internal Complaint Committee is constituted with the following Head of Sections and staff members under the chairmanship of the Principal.
S.NO. |
NAME |
DESIGNATION |
|
1 |
K MOHAMMED |
HTT |
MEMBER |
2 |
M SAILAJA |
AO |
MEMBER |
3 |
K VENKATESWARLU |
L/TT |
MEMBER |
4 |
G LAKSHMI JYOTHI |
L/TT |
MEMBER |
5 |
A LAKSHMI KANTHAMMA |
OFFICE SUPT. |
MEMBER |
6 |
N YASWANTH NAGA SUBRAMANYAM |
STUDENT |
MEMBER |
7 |
J HARSHEE |
STUDENT |
MEMBER |
8 |
T LOKESH |
STUDENT |
MEMBER |
- Committee for SC/ST is constituted with the following Head of Sections and staff members under the chairmanship of the Principal.
S.NO. |
NAME |
DESIGNATION |
|
1 |
K VENKATA RAMANA BABU |
PRINCIPAL |
CHAIRMAN |
2 |
K MOHAMMED |
HTT |
MEMBER |
3 |
T SRINIVASULU |
SL/MATHS |
MEMBER |
4 |
K VENKATESWARLU |
L/TT |
MEMBER |
5 |
T SOMAIAH |
LIBRARIAN |
MEMBER |
6 |
A LAKSHMI KANTHAMMA |
OFFICE SUPT. |
MEMBER |
7 |
K VENKATA RAO |
L/PHY |
MEMBER |
8 |
K SOLMAN |
CL/ENG |
MEMBER |
-
- Internal Quality Assurance Cell
Internal Quality Assurance Cell is constituted with the following Head of Sections and staff members under the chairmanship of the Principal.
S.NO. |
NAME |
DESIGNATION |
|
1 |
K MOHAMMED |
HTT |
MEMBER |
2 |
M SAILAJA |
AO |
MEMBER |
3 |
K VENKATESWARLU |
L/TT |
MEMBER |
4 |
T SRINIVASULU |
SL/MATHS |
MEMBER |
5 |
A LAKSHMI KANTHAMMA |
OFFICE SUPT. |
MEMBER |
6 |
K VENKATA RAO |
L/PHY |
MEMBER |
7 |
T SOMAIAH |
LIBRARIAN |
MEMBER |
- Name of Programmes approved by AICTE
- Diploma in TEXTILE TECHNOLOGY
- Fee
Tuition fee is Rs. 4,700. The reimbursement of the Tuition fee in respect of all eligible candidates will be as per the orders issued by the Government of Andhra Pradesh from time to time.
- Placement Facilities
- One faculty member, from Textile Technology Department have been appointed as Placements Officer. Further, all the students will be trained in interview skills as the topics have been included in the regular curriculum of English. Mock interviews are being conducted to enable them to face real interviews confidently.
- Campus placement in last three years with minimum salary, maximum salary, and the average salary
Academic Year |
DIPLOMA IN TEXTILE TECHNOLOGY |
MIN SALARY/ANUM |
MAX SALARY/ANUM |
2020-21 |
17 |
1.5 L |
2 L |
2019-20 |
08 |
1.2 L |
2 L |
2018-19 |
04 |
1.2 L |
2 L |
2017-18 |
13 |
1.2 L |
2 L |
2016-17 |
06 |
1.2 L |
2 L |
- Number of seats sanctioned with the year of approval
60
- Number of Students admitted under various categories each year in the last three years
Academic Year |
DIPLOMA IN TEXTILE TECHNOLOGY |
2021-22 |
9 |
2020-21 |
10 |
2019-20 |
20 |
- Total number of students admitted throughPOLYCET counseling
- Number of students admitted through Spot Admission
Academic Year |
DIPLOMA IN TEXTILE TECHNOLOGY |
2021-22 |
09 |
2020-21 |
08 |
2019-20 |
05 |
- Information on Infrastructure and Other Resources Available
Room No. |
Room type |
Carpet area (in m2 ) |
BR |
Board Room |
20 |
CS |
Central Store |
33 |
ECR |
Exam Control Office |
30 |
HK |
Housekeeping |
10 |
HOD |
Cabin for Head of Dept. |
20 |
MAINT |
Maintenance |
10 |
OFF |
Office All Inclusive |
150 |
PA |
Pantry for staff |
10 |
PO |
Placement office |
30 |
PRINC |
Principal office |
30 |
SC |
Security |
10 |
STF1 |
Faculty room |
30 |
BC |
Boys common room |
75 |
BH |
Boys Hostel |
25 |
CAF |
Cafeteria |
150 |
FA |
First aid cum Sick room |
10 |
LW |
Girls Common Room |
75 |
SS |
Stationery store |
10 |
TOI |
Toilets |
64 |
DH |
Drawing hall |
161 |
LAB1 |
Laboratory 1 |
365 |
LAB4 |
Laboratory 4 |
33 |
LAB5 |
Laboratory 5 |
107 |
LAB6 |
Additional workshop |
150 |
LAB2 |
workshop |
260 |
LAB3 |
Laboratory 3 |
91 |
ROOM1 |
Class room |
42 |
ROOM2 |
Class room |
107 |
SH |
Seminar Hall |
148 |
T ROOM |
Tutorial Room |
55 |
CMPC |
Computer centre |
72 |
CMPC1 |
Computer Centre 1 |
150 |
ENLGLI |
Language Laboratory |
68 |
LIB |
Library and Reading Room |
70 |
LIB1 |
Library and Reading Room 1 |
300 |
- Hostel Facilities
- At present, the government has allotted land for the construction of the hostel building near the institute. The requisite funds have also been released and the construction work is in progress by APEWIDC.
- Library
-
- Number of Library books/ Titles/ Journals available(program-wise)
S.No. |
Item |
Number |
1 |
Number of Titles |
768 |
2 |
Number of Volumes |
876 |
3 |
Number of eBook Titles- Diploma |
520 |
4 |
Number of eBook Volumes-Diploma |
2720 |
- List of online National/ International Journals subscribed
S.No. |
Name of the Journal |
Publications |
1 |
Textile Institute |
Taylor and Francis Ltd |
2 |
Spinning |
SITRA |
3 |
Soft Skills |
IUP Publications |
4 |
English Studies |
IUP Publications |
5 |
Entrepreneurship Development |
IUP Publications |
The Digital library is provided with 30 computers where students can access all kinds of e-content through the Internet
- List of Major Equipment/Facilities in each Laboratory/Workshop
Major Equipment |
S.No. |
YARN MANUFACTURE LABORATORY |
1 |
BLOW ROOM |
2 |
CARDING |
3 |
DRAW FRAME |
4 |
SPEED FRAME |
5 |
RING FRAME |
6 |
AUTO CONER |
7 ROTOR SPINNING |
8 PIRN WINDING MACHINE |
9 TWO-FOR-ONE TWISTER |
FABRIC MANUFACTURE LABORATORY |
1 |
PEDAL LOOMS |
2 |
HAND LOOMS |
3 |
DOBBY LOOMS |
4 |
JACQARD |
5 |
RAPIER LOOMS |
6 CIRCULAR KNITTING MACHINE |
7 |
ELECTRONIC JACQARD |
|
TEXTILE CHEMICAL PROCESSING LAB |
1 |
WATER BATH |
2 |
JIGGER DYEING MACHINE |
TEXTILE TESTING LABORATORY |
1 |
WET AND DRY BULB HYGROMETER |
2 HOT AIR DRYING OVEN |
3 |
FIBER FINENEES TESTER |
4 |
DIGITAL FIBROGRAPH |
3 |
TRASH ANALYSER |
4 |
YARN TWIST TESTER |
5 |
ASTM BOARD FOR YARN ANALYSIS |
6 |
STELO METER |
7 TENSILE STRENGTH TESTER |
8 SINGLE YARN STRENGTH TESTER |
9 FABRIC THICKNESS GAUGE |
10 STIFFNESS TESTER |
11 DRAPE METER |
12 CREASE RECOVERY TESTER |
13 TEAR STRENGTH TESTER |
14 BURSTING STRENGTH TESTER |
15 AIR PERMEABILITY TESTER |
16 ABRASION AND PILLING TESTER |
|
- Computing Facilities
- Internet Bandwidth
The institute is provided with a 40 MBPS optical fiber BSNL internet connection.
- Number and configuration of System
Computer Centre -1- with 40 Computer Systems
Computer Centre (CAD Lab) â 2 with 45 Computer systems
Digital Library with 30 Computer Systems
- Total number of the system connected by LAN
115 Nos.
- Innovation Cell
An Innovation Cell was established at the institute. The purpose of this cell is to make them aware of the latest technological advancements. They conduct awareness camps related to ignite the young minds so that they can think creatively. The faculty in charge would guide the students in selecting the projects and also help them prepare innovative models for exhibiting in events such as âTechfestâ conducted at different levels- institute, district, and state.
- Games and Sports Facilities
On-campus, students are encouraged towards games and sports. In this context, few of our student went to state-level competitions of IPSGM(Inter Polytechnic Sports and Games Meet) every year. in the district level of IPSGM few prizes won by our students every year
- Extra-Curricular Activities
Five villages (Ankireddy Palem, Vengalaya Palem, China Palakaluru, NayuduPet, and Chowdavaram) have been adopted by this Institution. Each village has been assigned to two faculty members and a group of students. They visit the village once in a fortnight and interact with the villagers and enlighten them regarding swatch Bharath, the importance of cash-less transactions, and any other govt. sponsored schemes etc.,
The program Vanam-Manam is being practiced as a continuous process involving the students, faculty, office staff, and external agencies through which plantation drives are conducted during the rainy season. The focus is more on the survival of plants than the no. of saplings. Drip irrigation facility is provided in 2 acres with the assistance of RDT, an NGO.
Conducted various awareness programs for the students inviting experts to the Institution viz., Legal, Banking, Gender, Anti-ragging, Health Awareness, Blood grouping camp, International Yoga Day, Cashless Transactions, Energy Conservation, etc.,
Organized Academic Excellence Meet i.e. a two-day Career Planning Awareness camp for students from Rural Government schools of nearby villages.
- Soft Skill Development Facilities
The personality development topics such as Attitude, Adaptability, Goal Setting, Motivation, Time Management, Critical Thinking, Creativity, Problem Solving, Team Work, Leadership, Stress Management etc, are taught to the students through activities designed for Enhancing English and Employability Skills for final year students.
- Curricula and syllabus for each of the Programmes as approved by the University
Adherence to the academic calendar is strictly followed as the curriculum is designed and the examinations are conducted throughout the state as per the schedule by the State Board of Technical Education and Training, Andhra Pradesh.
- Academic Calendar of the University
The Academic year for all the Courses shall be in accordance with the Academic Calendar constituted by Commissioner of Technical Education, Andhra Pradesh.Working days in the week are from Monday to Saturday. And there shall be 7 periods of 50 minutes duration on all working days.
- Internal Continuous Evaluation System and place
Theory subjects: For the internal assessment, Unit tests are conducted for theory subjects. The question papers are set by the subject teachers who have taught them. Internal examinations (2 Unit Tests / Semester) will be conducted for awarding sessional marks on the dates specified. Average of marks obtained in all the prescribed tests will be considered for awarding the sessional marks.
Practical subjects: Studentâs performance in Laboratories / Workshop shall be assessed during the year/ semester of study for 40% marks in each practical subject. Allotment of marks should be discrete taking into consideration of the studentsâ skills, accuracy, recording and performance of the task assigned to him / her. Each student has to write a record / log book for assessment purpose. In the subject of Drawing, which is also considered as a practical paper, the same rules hold good. Drawing exercises are to be submitted in order for assessment.
External Examination: For theory examinations The Examination committee of the Institution sets question papers employing the services of experienced faculty of the department.
For practical examinations, except in drawing, there shall be two examiners. The external examiner shall be appointed by the Principal in consultation with the respective Head of Section preferably choosing a qualified person from any local Industry/ nearby Government Polytechnic/ Local Government Organization. The Question paper should cover all the experiments/exercises prescribed.
- In-plant Training Assessment: Assessment of Learning outcomes by both the faculty and Training mentor of the Industry for 80% and Training Report, Demonstration of any one of the skills listed in Learning outcomes & Viva- Voce for 20%.
- Enrollment of students in the last 3years
Item |
DTT |
2021-2022 |
2020-2021 |
2019-2020 |
Total number of students, admitted through state level counseling(POLYCET ) |
9 |
10 |
20 |
Number of students, admitted through Institute level quota(Spot Admission ) |
9 |
8 |
5 |
Number of students, admitted through lateral entry(IVC ) |
0 |
0 |
0 |
Total number of students admitted in the Program |
18 |
18 |
25 |
- List of Research Projects/ Consultancy Works
- Industry Linkage
Technical Education of AP has entered an MoU with CISCO to offer four modules of Networking Program and it is taught so that certification from CISCO along with Diploma can be obtained. IT essentials module is being implemented in this institution.
- MoUs with Industries
Government Institute of Textile Technology, Guntur has entered the MoUâs with the following Industries / Firm/ Company/ Department
- NSL TEXTILES LTD, EDLAPADU, GUNTUR
- SESHA SAI SPINNING MILLS, CHEBROLE, GUNTUR
- VISWA TEJA SPINNING MILLS, BOYAPALEM, GUNTUR
- BALARAMA KRISHNA SPINNING MILLS, GUNTUR
- THATAVARTHI APPARELS LTD, CHILAKALURIPET